Image sequence-based risk behavior detection of power operation inspection personnel

A novel image sequence-based risk behavior detection method to achieve high-precision risk behavior detection for power maintenance personnel is proposed in this paper. In this method, the original image sequence data is first separated from the foreground and background. Then, the free anchor frame detection method is used in the foreground image to detect the personnel and correct their direction. Finally, human posture nodes are extracted from each frame of the image sequence, which are then used to identify the abnormal behavior of the human. Simulation experiment results demonstrate that the proposed algorithm has significant advantages in terms of the accuracy of human posture node detection and risk behavior identification.     

Convolutional Neural Network Auto Encoder Channel Estimation Algorithm in MIMO-OFDM System

Higher transmission rate is one of the technological features of prominently used wireless communication namely Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing (MIMO–OFDM). One among an effective solution for channel estimation in wireless communication system, specifically in different environments is Deep Learning (DL) method. This research greatly utilizes channel estimator on the basis of Convolutional Neural Network Auto Encoder (CNNAE) classifier for MIMO-OFDM systems. A CNNAE classifier is one among Deep Learning (DL) algorithm, in which video signal is fed as input by allotting significant learnable weights and biases in various aspects/objects for video signal and capable of differentiating from one another. Improved performances are achieved by using CNNAE based channel estimation, in which extension is done for channel selection as well as achieve enhanced performances numerically, when compared with conventional estimators in quite a lot of scenarios. Considering reduction in number of parameters involved and re-usability of weights, CNNAE based channel estimation is quite suitable and properly fits to the video signal. CNNAE classifier weights updation are done with minimized Signal to Noise Ratio (SNR), Bit Error Rate (BER) and Mean Square Error (MSE).     

Adaptive constraint control for flexible manipulator systems modeled by partial differential equations with dead-zone input

In this article, based on partial differential equations (PDEs), the flexible manipulator system with both dead-zone input and state constraints is studied. The dynamic model of the flexible manipulator system is described by PDEs. The parameters of the dead-zone input are unknown, and the state constraint problem is also considered. An adaptive approach is proposed to offset the effects caused by dead-zone input. Thus, to guarantee that all states remain within their respective constraint regions, the boundary control law based on the barrier Lyapunov function is given, and an adaptive controller is designed. According to the Lyapunov analysis method, the control method is given to ensure that all signals of the closed-loop system are bounded and all states satisfy the constraint conditions. Finally, simulation results show the effectiveness of the proposed control method in this article.     

采用八叉树和OSG分页结点的海量点云三维可视化

针对现有海量点云可视化方法存在索引构建时间长、内存占用大等问题，研究一种八叉树索引结合OSG分页结点的快速可视化方法，可在占用较小内存的基础上快速建立点云索引并实时调度。采用八叉树索引结构对海量点云进行数据组织，建立各层级的八叉树结点并以文件映射的方式分块保存，对结点文件重组织转换为支持OSG渲染引擎的多分辨率点云数据。采用基于OSG分页结点的实时调度技术，对海量点云进行高质量可视化。与目前两款主流的点云数据处理商业软件进行实验对比分析，结果表明所提方法具有索引建立速度快、内存占用小等优点，同时可视化交互更加流畅，适用于各种配置计算机下海量点云数据的调度管理与实时可视化。     

移动物料信息分布式传输方法及应用

在流程工业生产中,移动物料计量信息的传输普遍采用电台和无线模块。接收电台周围环境严重影响计量信息的传输效果,尤其是钢结构厂房、电磁干扰区内,数据传输过程中的丢包率、误码率相当严重。本文提出一种多节点分布式传输方法,根据各个生产作业区环境条件设置相应的WIFI节点数,实现对作业区的无线信号覆盖。网络覆盖区内无线模块、PDA终端(PDA)、终端查询设备通过节点工作频段和阵列天线自适应调节,实现数据传输最佳化。铜熔炼生产现场测试表明,此种传输方法可以有效消除周围环境的电磁干扰,数据丢包率低于0.1%。     

网络化雷达现状及技术发展趋势

随着新的作战对象和作战样式的出现,以及作战环境更加复杂,仅依靠单个雷达节点的能力已经越来越难以满足新的作战需求。文中针对网络化雷达这一新体制雷达开展研究,通过分析国外网络化雷达系统发展现状、趋势及关键技术,总结对我国网络化雷达技术发展的经验启示,为我国网络化雷达系统发展提供技术参考。     

基于改进正弦余弦算法的无线传感器节点部署优化

为了提高无线传感器网络（WSN）的性能，提出了一种基于改进正弦余弦算法（ESCA）的节点部署优化方法。首先，引入双曲正弦调节因子和动态余弦波权重系数，以平衡算法的全局探索与局部开发能力；然后，提出了一种基于拉普拉斯和高斯分布的变异策略，避免算法陷入局部最优。对于基准函数的优化实验结果表明，ESCA相比引力搜索算法、鲸鱼优化算法、基本正弦余弦算法（SCA）及其改进算法具有更高的收敛精度和收敛速度。最后，将ESCA应用于WSN节点部署优化，结果表明其优化覆盖率相比改进粒子群优化算法、外推人工蜂群算法、改进灰狼优化算法和自适应混沌量子粒子群算法分别提高了1.55个百分点、7.72个百分点、2.99个百分点和7.63个百分点，用更少节点便可达到相同目标精度。     

考虑节点过载的碳排放空间关联系统级联失效模型

为提高突发事件级联失效对现实碳排放关联系统破坏程度的评估可信性，在传统复杂网络的"负载-容量"级联失效模型基础上，考虑个体成员对负载的冗余能力，提出一种过载失效概率，构建了考虑节点过载状态的级联失效模型，并基于节点特性提出了6种过载节点负载分配策略。仿真结果表明：在过载节点负载分配策略中，综合分配策略整体上较优，能够有效控制级联失效的规模，增加网络鲁棒性；在一定范围内提升过载参数有助于降低级联失效的影响，但提升到一定程度时改善效果不明显；在不同负载分配策略下，剩余系数存在一个最优值，容量可调参数存在最优区间，可以使碳排放关联网络保持较好鲁棒性的同时，花费较小的构建成本，其中紧密度分配策略对应的网络构建成本较高。     

Reduced-order multiple observer for Takagi–Sugeno systems with unknown inputs

The paper discusses a niche area problem — the design of reduced-order multiple observers which can achieve the finite-time state reconstruction for Takagi–Sugeno multiple models with unknown inputs. The new reduced-order multiple observer obtained in this paper is only the second ever designed, the author of this paper continuing his work started one year ago with the introduction of the reduced-order multiple observer concept. The obtaining of the new reduced-order multiple observer is achieved by combining two classical reduced-order observers for linear time-invariant multivariable systems with unknown inputs and a full-order multiple observer for Takagi–Sugeno systems. The main innovative idea behind the design of the reduced-order multiple observer for Takagi–Sugeno systems described by the multiple models is the split of the multiple model into two subsystems: an unknown-input-free subsystem and an unknown-input-depending subsystem. The unknown-input-free subsystem is brought to the form of a standard multiple model and, in this situation, any algorithm to design full-order multiple observers can be used in the design of reduced-order multiple observers. The steps of the design procedure have been summarized and software implemented; then, the validation of the suggested algorithm has been done for two concrete cases associated to the motion of an aircraft during its landing     

Integral barrier Lyapunov function-based adaptive fuzzy output feedback control for nonlinear delayed systems with time-varying full-state constraints

In this article, an adaptive fuzzy output feedback control method is presented for nonlinear time-delay systems with time-varying full state constraints and input saturation. To overcome the problem of time-varying constraints, the integral barrier Lyapunov functions (IBLFs) integrating with dynamic surface control (DSC) are applied for the first time to keep the state from violating constraints. The effects of unknown time delays can be removed by using designed Lyapunov-Krasovskii functions (LKFs). An auxiliary design system is introduced to solve the problem of input saturation. The unknown nonlinear functions are approximated by the fuzzy logic systems (FLS), and the unmeasured states are estimated by a designed fuzzy observer. The novel controller can guarantee that all signals remain semiglobally uniformly ultimately bounded and satisfactory tracking performance is achieved. Finally, two simulation examples illustrate the effectiveness of the presented control methods.